I want to tear off the paneling in a couple of rooms. Having removed a piece of paneling I find several coats of paint peeling off of the walls. Not all the paint is loose; some is still on and hard to scrape off.
I want a smooth finish on the walls. Should I drywall over the painted surfaces with 1/4 drywall or do you have any suggestions? Thank You!
Larry031
We get many questions on our radio show about the many mysteries of removing paneling. The answers depend on the condition of the wall as well as how the paneling was installed. If the paneling was nailed on, you may be able to remove it with little wall damage. But if it was glued in place on drywall, the paper face of the drywall will most likely be ripped off in the process of removing the paneling and the wall will need to be skinned.
Skinning the wall with ¼ inch drywall is always the final option. If you do this, remember that you’ll need to extend door and window jambs, as well as switch and outlet boxes to adjust for the new thickness. In your case, you could also try and strip the stuck on paint with a chemical remover, or one of the somewhat less-effective but more people friendly low-toxic strippers.
Another option would be to get as much paint off as possible and then skim coat the existing surface with a plaster-like finish. There are several fairly thick plaster finishes available on the market today that are designed for do it yourselfers. For example, BEHR makes a Venetian plaster finish that is beautiful and the faux technique used for applying it can hide a multitude of wall blemishes.
If you do end up painting the walls, remember this: Never use anything but FLAT paint! If the wall has any imperfections, even a slightly glossy finish will highlight those while the softer flat finish will keep them hidden.
Finally, no matter what finish you use, be sure to prime the wall first. Primers are like the glue that makes paint stick. They’ll neutralize whatever came before and provide a perfect base for the new surface coat.
Leave a Reply