Always wear eye protection and waterproof gloves when working with polyurethane sealant and work in a well-ventilated area.
Widen the crack to a minimum of 1/4 inch using a chisel and hammer (the edges of the crack should be vertical or beveled in an inverted “V”).
Cut the tip of the nozzle on an angle with a utility knife to match the width of the crack and load into a standard caulk gun.
Slowly draw the gun along the joint forcing a bead of repair caulk deep into the crack.
Remove excess material with a trowel immediately after placement.
- QUIKRETE® Polyurethane Mortar Joint Sealant
- Utility knife
- Caulk gun
- Hammer and chisel
- Waterproof gloves
- Safety glasses
- Stiff bristle brush
- Citrus-based cleaner OR mineral spirits
For more project ideas just like this, visit QUIKRETE.com.
Leave a Reply