00:00/ 00:00

Repair Dents in Corner Molding

  • Transcript

    LESLIE: Natasha in Missouri is on the line with a molding question. What can we do for you today?

    NATASHA: Our house is about 11 years old and the interior walls – the sheetrock or the drywall – is finished with a nice, round, bullnose corner, so it doesn’t come to a right angle, so to speak. And just through wear and tear with kids and dogs, we have found several dents appearing. And I’m wondering if you have ideas on how we might repair that or if we are going to have to just replace that whole corner edging. Any thoughts?

    TOM: Yeah. I mean is this like the metal rounded corner?

    NATASHA: I think it’s metal. I tap on it and it sounds plasticky but it might be metal, which would explain the dents.

    TOM: Why not just plaster over those?

    NATASHA: I thought about that. Some of them are just little dimples but I don’t know if I can successfully fill and sand and patch. But that’s one thought we’ve had.

    TOM: Yeah. You could skim-coat it. And the other thing that you could do, if it’s a crisp dent, is you can use auto-body filler. We use that on metal doors, like metal doors that have dents in it and that sort of thing. It’s just a little harder to sand. But if it’s just the outside corner on drywall, you could use spackle for that. Build it up and then sand it. It sands really easily. You’re just going to have to prime it and repaint it.

    NATASHA: Yeah?

    TOM: Shouldn’t be a big deal.

    NATASHA: Great. Well, that’s exciting. Some other advice I’d had was to replace the whole corner, so I love your suggestion much, much more.

    TOM: Well, you can always do that but why don’t we try the easiest stuff first?

    NATASHA: Maybe in the bedrooms where it’s not so obvious. We’ll try that first, so …

    TOM: Then you can practice and you’ll get good at it.

    NATASHA: That’s right. Hey, thanks so much. I really appreciate your help.

    TOM: You’re welcome, Natasha. Thanks so much for calling us at 888-MONEY-PIT.

Leave a Reply