00:00/ 00:00

Ceramic Floor Installation

  • Transcript

    LESLIE: Mike in New York needs some help with a flooring project. Tell us what you’re working on.

     
    MIKE: Hi, there. I own two rental properties and I just wanted to tell you and Tom that your advice has really helped me several times already.
     
    TOM: Oh, fantastic.
     
    LESLIE: Great, thanks.
     
    MIKE: Here’s the question. When I’m installing a ceramic tile floor, if I have a cement floor underneath it – stripped off the old floor –
     
    TOM: Right.
     
    MIKE: – can I skip the backer board – what some people would call mason’s drywall step – and go right to thinset and lay the tile down?
     
    TOM: You can, as long as the concrete floor is perfectly flat.
     
    MIKE: Right.
     
    TOM: Sometimes, using the backer over that helps you …
     
    LESLIE: Gives you a more stable surface.
     
    TOM: Yeah, helps you kind of smooth out the bumps and lumps that can occur naturally in a concrete floor. Because remember, that ceramic tile doesn’t bend very well and if you don’t put it on perfectly flat …
     
    MIKE: Right, so if the floor – if I level it out and fix any cracks, then I can …
     
    TOM: You can go right on top of it. Yep. Sure, it’s done all the time.
     
    MIKE: Does it have to be scarified somewhat also?
     
    TOM: No, as long as you have a good adhesive, then I think it should be fine. You’re probably going to put it down with a mastic.
     
    MIKE: Yep. OK.
     
    TOM: And as long as you have good adhesive and use a good glue trowel with like quarter-inch slots in it, so you have good bonding of the tiles to the concrete floor, it’ll be perfect.
     
    MIKE: OK, you have helped me once again.
     
    TOM: Alright, Mike. Good luck with that project. Thanks so much for calling us at 888-MONEY-PIT.

Leave a Reply

RECOMMENDED FOR YOU

More tips, ideas and inspiration to fuel your next home improvement, remodeling or décor project!