Sealing and Waterproofing Damaged Mortar Joints | Video

  • Transcript

    Project Instructions

    Always wear eye protection and waterproof gloves when working with polyurethane sealant and work in a well-ventilated area.

    Step 1
    Widen the crack to a minimum of 1/4 inch using a chisel and hammer (the edges of the crack should be vertical or beveled in an inverted “V”).

    Step 2
    Cut the tip of the nozzle on an angle with a utility knife to match the width of the crack and load into a standard caulk gun.

    Step 3
    Slowly draw the gun along the joint forcing a bead of repair caulk deep into the crack.

    Step 4
    Remove excess material with a trowel immediately after placement.

    Shopping List


    For more project ideas just like this, visit

Leave a Reply