00:00/ 00:00

Trick of the Trade for Caulking a Bathtub

  • Transcript

    LESLIE: Now we’ve got Vernon in Colorado who’s fixing up the bath. How can we help you?

    VERNON: I had heard a while back on your show, if you’re going to recaulk your bathtub, to fill it up with water? But I do not remember if anything was said about removing the water immediately after it was caulked or letting the caulk set up first before you would let the water out. So I wanted to check on that before I started my project with some good kitchen-and-bath caulk.

    LESLIE: Well, absolutely. The tip you heard about filling the tub with water is totally correct. And the reason why we do that is when you fill the tub with water, it sort of weighs down and sits down onto the base a little more.

    So if you fill it with water and then go ahead and caulk, then you let the caulk dry and then you drain the bath. When it sort of empties out, it’s going to lift back up and compress that caulk. So the next time you actually go to take a bath or a shower and you’re standing in there and the tub presses down on the base, it’s going to stretch the caulk and it’s all going to stay in place.

    So that’s a really good trick of the trade because it keeps it in its place longer and it really lets it adhere to where it needs to be.

    VERNON: Perfect. OK. That’s what I’ll do. Thank you so much.

    TOM: You’re welcome, Vernon. Good luck with that project. Thanks so much for calling us at 888-MONEY-PIT.

Leave a Reply

RECOMMENDED FOR YOU

More tips, ideas and inspiration to fuel your next home improvement, remodeling or décor project!