00:00/ 00:00

Storm Door Out of Alignment

Tags:
  • Transcript

    LESLIE: Roger in Alabama, you’ve got The Money Pit. How can we help you today?

    ROGER: I have a problem with a door. It’s a storm door. And when I originally installed it, everything looked perfect on it. And now, there is a large gap at the bottom and a small gap at the top and the latch doesn’t really want to hold anymore. And I put levels on it and everything looks like it’s supposed to be but it’s not. And I’m at a standstill trying to figure out how to fix it outside of knocking my post out of align.

    TOM: OK. So it sounds like the door is out of alignment and it’s not square. Got a situation where the jamb probably has to go up or down. So, for example, if you were to take the jamb and move it down, then the outside edge of the door will move up. If you were to take the jamb and move it up, the outside edge of the door would move down. So it sounds like something is not in alignment.

    Storm doors can be tricky because every side of the jamb is applied separately. But what I might do is I might leave the jamb side attached, then try to reset the other two pieces of the door.

    In terms of the gap at the bottom, if you can’t close that, just add weatherstrip to the outside of the door. You know, you can pick up a door sweep that has sort of a metal flange with a broom-like bristle edge at the bottom that works very well. We use it on exterior doors all the time. And that will stop drafts from coming through it.

    But it sounds like the door is out of alignment. What you’ve described with uneven gaps and a latch doesn’t work means that the door is simply not square in the opening.

    ROGER: OK. I think I’ve got an idea of what I can do with it now.

    TOM: Alright. Great. Roger, hope that helps. Thanks so much for calling us at 888-MONEY-PIT.

Leave a Reply

RECOMMENDED FOR YOU

More tips, ideas and inspiration to fuel your next home improvement, remodeling or décor project!