How to Seal Fireplace Chimney
LESLIE: Jim in Arkansas is on the line with a chimney question. How can we help you today?
JIM: Well, the reason I called is because I have an issue with my fireplace. It’s just a regular wood-burner. It doesn’t have an insert in it. And I want to seal the chimney for health and energy-loss reasons. I was thinking about putting a steel plate on the top because here in the Ozarks, whenever we get bad weather and that wind is howling, it sounds like a freight train coming through my fireplace and I have quite a bit of a draft. And the damper just does not hold securely enough so I don’t get that air through there.
I was wondering, can you give me some advice as to who to contact if it’s feasible to do something like this? Is safety a concern?
TOM: It’s certainly feasible to do this project. It’s sort of the kind of project that you’ve got to be a bit creative with, because what you’re going to want to do is try to form some sort of weather-tight shield across the top of the flue. I would tell you that whatever you do to this, make it removable because chances are if you sell this house at some point in the future, somebody might find it really attractive to have a fireplace there in the Ozarks and want to reactivate this chimney, so to speak.
So, however you seal it across the top, you’ve got find out – find an easy way to do that. One thing that comes to mind is that there’s a damper that fits in the top of a chimney liner. And it’s sort of like a weighted, heavy, metal door. And the way it’s activated is that there’s a stainless-steel cable that goes down through the middle of the chimney and it’s hooked onto the side of the fireplace. And when you release the cable, the door flops open. So that would be a way to put a device up there that’s really designed for a flue and will serve the dual purpose of sealing off the draft from the top.
JIM: OK. Well, I thank you very much for giving me the time. And I love your show. Listen to it two hours every Sunday morning.
TOM: Alright. Well, thank you very much, Jim. It’s nice to hear. We appreciate it.