How to Repair Large Holes in Drywall or Sheetrock

crack repair, ceiling crack, wall crack

Repairing large holes in your drywall may seem like an intimidating task, but with some basic tools and materials, you can fix them yourself in just three easy steps. Here’s what you’ll need to make your repair.


  • Framing Square
  • Drywall Jab Saw
  • Utility Knife
  • Drill
  • Quick Square
  • Drywall Joint Knife
  • Sanding Block
  • Paint Brush or Roller


  • 1 ¼” Drywall Screws
  • Scrap 2×4 or 1×4
  • Drywall Mesh Tape
  • Scrap Drywall
  • Pencil
  • Mud Pan
  • Drywall Compound
  • Paint


When taking on this DIY task, be sure to equip yourself with the proper safety gear.


Outline area. Start by outlining the damaged area with a framing square. Use a drywall saw to remove the damaged piece and a utility knife to clean the edge if needed.


Add support pieces. Large patches need to be supported by some kind of backing. Wood strips are excellent for this. Place wood strips a few inches longer that the height of your cutout, inside the hole. Then, attach them with drywall screws. Repair clips can be used as an alternative to drywall screws. Simply follow directions on the package.


Insert patch. Cut a drywall patch 1/8 of an inch smaller than your cutout’s dimensions and attach it to the wooden support pieces with drywall screws. Apply mesh tape over the gaps and finish with three coats of drywall compound. Allow each coat to dry according to manufacture instructions. Once the final coat is dry, sand and paint as needed.

Your drywall repair is now complete!

Looking for great tools to help get your project done?  Shop Stanley, Black & Decker and DeWALT for everything you need!


Leave a Reply