How to Restore a Worn Deck

Submitted By
2 expert, 0 community

I had my deck restained a couple years ago and now the deck surface looks really dried out and seems like it is starting to warp. It is just the deck floor not the rails or spindles. Would power washing and restaining help or do I need to replace the deck floor?

Post new answer

Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.


Wood decking is a beautiful and also a very practical thing and can really add to a home’s desirability. However, due to the positioning of decking it tends to get a lot of sunlight and weather elements and so it needs to be cared for, lest it looks worn and dried out.

There are two ways to treat the decking. Firstly, you can use a water based stain this will resist mildew and algae stains. Alternatively, a semi-transparent stain also helps and adds colour, but still allows the grain of the wood to be seen.
Ideally, treat the wood deck when there will be three days dryness in a row and the temperature is between 50 to 90 degrees Fahrenheit.

• Remove all furniture and items from the decking and the areas that are rough with sandpaper. 80 grit should be ideal. Use a power hose to wash the debris from the decking. If there are items between the boards, use a putty knife for removal.

• Now, use a bucket of laundry detergent and scrub the area with a brush and then rinse with clean water. If the decking is really stained hire a pressure washer with a 25 degree nozzle. This reduces the need for chemicals.

• Use painter’s tape to cordon off the area around the decking and place a drop cloth beneath. The tape and the cloth will protect the surrounding area from the stain.

• Stir the stain in its can and then place it in a tray. Place the roller in the stain and begin to apply it on the decking, thinly. Begin at one end of the deck and work towards the other. This is best done two to three boards at a time. When this dries repeat this step again.

• When you have applied two coats then leave the decking to dry for a day or so before placing furniture and other items back on it.

Your decking will now be dry and the whole area should look great again.

1 user found this helpful
You voted
Was this answer helpful?