Ceramic Tile Grout Cleaning

Submitted By
Nancy Wiltzius
Answers
0 expert, 1 community
Q:

My well-meaning son put a preservative on my white bath tub tile. The preservative turned yellow when it dried. Is there anyway to clean it off without completely removing the grout and redoing it? I don't know what the preservative was, it was done years ago. I have been scraping it off the tiles themself since then. I am down to the grout now, but scraping is also removing grout.

Thanks, Nancy

Post new answer

Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Answers

Nancy,

Sounds like your grout is deeply stained and requires an abrasive. We recommend using a bleach mix with water (please be sure you have proper ventilation, wear safety goggles and a respirator mask), and agitate with a brush. To prevent further staining, use a water-based sealer after you have cleaned the grout. This will add a nice layer of protection and, later, all you will need is a water-based grout cleaner and brush to keep your grout clean.

Hope this helps!

Lenny Sciarrino, President/CEO, Granite Gold Inc.

0 users found this helpful
You voted
Was this answer helpful?
0%
YesNo
100%