Get instructions on how to insulate around pipes in a crawlspace. Find out what kind of insulation to use, how to install the insulation, how to keep insulation in place, and how to insulate around water pipes in a crawlspace.
LESLIE: Bonnie in North Dakota needs some help keeping a crawlspace warm. Tell us about what’s going on.
BONNIE: I was just wondering how you insulate a crawlspace  when the floor joists go one direction and then your water lines go another direction.
TOM: Very carefully. (all chuckle) You know, it’s not so hard to do. I mean that’s very common that the water lines are going to go perpendicular to the floor joist. Typically, you want to use unfaced batt insulation ; so unfaced fiberglass. You’re going to carefully – I would use the precut pieces; they’re easier to handle. And you’re going to squeeze those up in between the floor joists. You’re going to support them in place with wire hangers and whenever you come to a place where there are pipes in the way, just sort of work the insulation around it. But remember, don’t jam the insulation in; don’t compress it, because insulation has to be fluffy to work properly.
TOM: And then after you get the insulation in, make sure you put a vapor barrier  down across the crawlspace floor to reduce the amount of humidity in the crawlspace . That will help keep the insulation drier and make it even more effective.
LESLIE: Mm-hmm. Because once it gets moist it cuts the r value.
BONNIE OK. OK, great. Thank you.
TOM: You’re welcome, Bonnie. Thanks so much for calling us at 888-MONEY-PIT.