LESLIE: Pam in Florida has a porch question. How can we help you today?
PAM: We live on the water and in Florida, there’s a lot of wind on the water. We’re close to the Gulf of Mexico. And we have a screened porch with aluminum railings and the wind keeps blowing the screen sections out. We’ve tried all different types of screens and double-screening them and all different types of splines. And I wondered if you had any better ideas for us.
TOM: Are we talking about on doors or windows?
PAM: We’re talking about screen sections on a screened porch.
TOM: Screened porch. OK. And so, how big are these sections?
PAM: Probably 4×6.
TOM: Pretty big. Are you using vinyl screening or are you using metal screening?
PAM: Vinyl.
TOM: Yeah, I think that’s the issue. The vinyl screening is pretty soft and pretty flexible. Not very sturdy. I think you’re going to need to use a heavier-gauge screening in order to make this more permanent. And you’re also going to need to consider not only the attachment points – I’m not quite sure how you’re doing that – but it’s got to be super-secure. And you might want to add grilles to divide that up into a bit smaller space. It could be a thin grille but it could – but a grille would give it some additional strength.
So I think you’re going to need to use much heavier screening and not vinyl screening, OK? Because I think putting on a double layer of the vinyl is going to really not get you where you need to be. It really should be heavy metal screening when it’s that – when it’s a 4×6-foot area.
PAM: Right. Do you know if metal screening comes in a fine enough mesh to keep no-see-ums out?
TOM: Oh, yeah. It comes in different mesh densities and different gauge metals. You’ve just got to find a good source or supply down there for it.
PAM: Thank you very much. Appreciate the help.
TOM: You’re very welcome.
Hi, same problem. So if the opening is very large, over 5 ft, will even the metal screen blow out?