LESLIE: Kelly in South Dakota is on the line and wants some help removing wallpaper. What can we do for you?
KELLY: We primed the walls. This has been about 10 years ago. And when I pulled back on the edges of the wallpaper, it seems as though it’s taking a bit of the drywall with it.
TOM: So, what you want to do is you want to get a tool called a paper tiger, which puts small holes in the surface of the paper. And it helps the wallpaper remover get behind it and loosen up the adhesive.
Now, in terms of wallpaper remover, you can use fabric softener, which works well, or you could use a commercially available product like DIF – D-I-F. But putting those holes in there is important because, otherwise, it doesn’t saturate the paper.
Now, if you do that and it still doesn’t loosen up and pull off, then what you need to do is go out and rent a wallpaper steamer. And that will use warm, moist air to separate the paper from the wall.
No matter how you do it, it is a lot of work. And once that wallpaper is off, you’re going to need to reprime that wall with a good-quality primer so you have a nice surface upon which to put your final color of wall paint.
KELLY: OK. Do you need to sand that once you get it all done?
TOM: Well, if it’s a little rough, just lightly sand it. You don’t want to sand it too much, especially because you don’t want to cut into the paper that’s part of the drywall. But a little bit of light abrasion is not a bad thing.
But the most important thing is a good-quality priming paint applied to that wall surface, because you’re going to have old sizing material and who-knows-what-else stuck to that. And if you put the primer on, it’ll give you a good surface upon which to apply the paint. The paint will flow nicely and it’ll look better when it dries.
KELLY: Well, thank you very much. I appreciate that.