How to Insulate Your Crawl Space and Save Money

Learn to cut energy costs and increase comfort

Knowing how to insulate your crawlspace is a great way to cut energy bills and increase comfort.  An unheated crawlspace can send cold air up through the floor of your home, making your heating system work harder and wasting energy. Adding fiberglass insulation batts between the joists in the crawlspace ceiling can keep the rooms above comfortable and lower your energy bills.

How to Insulate Your Crawl Space and Save MoneyHere's how to insulate your crawlspace:

  • Always install the insulation with the vapor retarder toward the warm side of the structure in heating climates. In a vented crawlspace, the warm side is usually up, closest to the floor.
  • The insulation should be installed all the way back at the end of each joist run so that it touches the band joist. You want complete coverage under the house.
  • Water pipes should be insulated and you will need to insulate carefully around electrical wiring and boxes.
  • Insulation should be placed around cross braces by cutting it and pushing it between the braces.
  • Once the insulation is in place between the floor joists, insulation hangers or nylon straps can be used to hold the product in place.
  • A 4- or 6-mil polyethylene vapor retarder should be laid down to completely cover the ground. Place rocks or bricks around the perimeter to hold it in place. 
     

For more ideas and tips on how to insulate your crawlspace and other areas of the house,  visit the www.insulateandsave.com

Post new comment

The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.