Cleaning Window Screens

How to care for and store window screens after summer has passed

Cleaning window screens is an important step in buttoning up your house for the winter. Window screens that have been exposed to the elements all summer long require special care and attention to extend their service, and here are a few tips to make the task easier.

First, remove the windows screens from the window frames. Place the window screens on a flat surface (such as the driveway) and use a mild soap, water and a soft bristle brush to remove dirt and grime. Clean both sides of the window screen and around the interior and exterior of the frame. Rinse off the window screens with lukewarm water, and allow the screen to dry completely before replacing in the window.

Alt=Cleaning Window ScreensHow to Clean Window Screens

Next, never use a pressure washer to clean window screens or windows because the force of the water can damage the units. Also, use extreme care when cleaning aluminum mesh, since it can be dented or creased if too much pressure is placed on the screen.

Finally, while most window screens may remain in the windows year-round, some homeowners prefer to store screens during winter months, which lessens the need for spring cleaning. If you choose to remove your window screens, make certain to store them either in an upright or flat position. Covering them with plastic or a sheet will keep windows screens clean while in storage. Finally, make sure nothing sits on top of (or leans against) the window screens to eliminate the chance of frames being bent or holes being poked in the screens.

Post new comment

The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Comments

Painting window screens

My Dad always painted our window screens......which were some kind of metal that would rust.....not aluminum. He used oil based gloss enamel, black and thinned it with paint thinner. It ended up the consistancy of milk. If the holes in the screen held paint, then he poked those out with a toothpick.

Painting screens

I once saw someone painting his screens to rejuvinate old screens that were no longer black. I mean the actual screening itself. He was not spraying paint, he was using a brush to put on the product. Any idea what he was using?